"ABOUT THE COVER"
|
Rigging schematic similar to that used in Vessel lift. SALES, INFORMATION CONTACTJEM ONE Rigging Tools, LLC P. O. Box 86830 Baton Rouge, LA 70879 TOLL FREE: 888-903-0500
|
John
Mendez, general foreman for JE Merit Constructors, Inc., and his rigging
crew, lift one of two Silos. The tail crane is a 45 ton
Grove Rough Terrain, and the main lift crane is a 4000w Manitowac. Two
Model SRS 12 JEM LATCH®s are being used with a JE Merit spreader beam.
Each of the two JEM LATCH®s are attached to the spreader beam via
shackle. An endless loop fiber sling is attached to the anchor shackle on
the JEM LATCH® and the loop is feed through a shackle attached to the
vessel lifting lug and then into the load zone and on to the load pin of
the JEM LATCH®. When the load is lifted, set, and secured, the workman
can signal to slack the hoist line, then with a pull of the release cord,
the sling loop is freed from the load zone of the JEM LATCH®. Same
procedure for the second
JEM LATCH® and the hoist line is ready to haul
away all rigging. No one is needed at the top of the vessel to cut loose
& retrieve the rigging.
CONTENTS
¨ Page 1 "TEAMWORK",JE Merit Constructors, Inc. ¨ Page 3 Photo(s)....Pala-Interstate, Inc. Pitt-DesMoines, Inc. JIC- James IndustrialConstructors, Inc. ¨ Page 4 RIGGING SAFETYCOMMENTARY "Lift Permit"¨ Page 6 AREA ERECTORS, Inc."Windy City" Photo....
|
Intro| Home | SRS Models | | Contact Us | Cost Benefit Analysis ||Request A Video | | Award Pictures || Newsletters |
| email: info@jemlatch.com |
| Mailing Address: 15635 Airline Highway Baton Rouge, LA USA 70817 |
| Toll Free: 888-903-0500 |
| Local Phone: 225-755-2554 |
| FAX line: 225-751-3713 |
